BMW handle reverse camera

AHD/CCD reversing camera

Product parameters

Image sensors

CCD (optional AHD).

Output signal format

NTSC (optional PAL).

Effective pixels

N system 728 (H) 500 (V) [optional p system AHD720P 1280 (H) 720 (V) / P AHD 1080P 1920 (H) 1080 (V) ].

Horizontal viewing angle

120°/170°

Waterproof rating

IP68

Synchronization mode

Synchronization within the country

Electronic shutter

1/50 (1/60) - 1/100,000 sec

Minimum illumination

0.1 Lux / F1.2

Automatic gain control

Automatic

White balance

Automatic

Backlight compensation

Automatic

The type of output signal

CVBS (optional AHD).

Video output

RCA interface (optional aviation head interface price is calculated separately).

Horizontal clarity

500 TV Line [720 TV Line/1080 TV Line optional].

Signal-to-noise ratio

≥48dB 

How the image is displayed

Horizontal mirroring (optional orthogonal)

Identify the line

Three-color ruler (optional blue ruler).

Operating voltage

DC12V (optional 24V, can be customized 9V~36V wide voltage price separately).

Operating current

≥150mA 

power consumption

≥2W  

Operating temperature

 -20℃~+75℃（RH95% Max)

Storage temperature

 -30℃~+80℃（RH95% Max)

Product features

Using imported chips, the image color is high-definition and more realistic

Digital supplemental night vision function, automatic exposure compensation when light is low, can clearly see the road conditions behind the car

With an electronic scale, a scale is displayed on the display, so you can see the approximate distance of the rear object from the rear of the car

The video cable is connected to the display, the power cord is connected to the power supply of the reversing light, and the video line number is automatically switched when the reverse gear is hung, and it is specially designed according to the size of the license plate light or the trunk handle, which is well concealed and not easy to be exposed when perfectly combined with the body

The product is waterproof, moisture-proof, fog-proof, shockproof, voltage-proof and high-temperature resistant

The reversing camera can be connected to the car display device, including the car display, car DVD, rearview mirror display, portable GPSNavigation, etc., it is convenient to monitor the surrounding ring mirror in an all-round way when reversing, with a wider field of vision and easier reversing

Green products, energy saving, low power consumption

Packaging information

Packed in a neutral color box

PACKING SIZE: 14*9*4.5CM

Product accessories

 1 x Car Camera

1 x 6m power cord

1 x 1 meter power cord

1 sheet of the product manual

1 product box

Installation Steps

Step 1

 First, remove the power supply cable at the car battery, and place the removed wire away from the electrodes to prevent the power supply from being accidentally turned on

Step 2

Determine the installation position of the vehicle camera, generally divided into two kinds:
one is installed in the position of the license plate holder license plate light, this installation is relatively easy, and the special car only needs to replace it with the original car license plate lightFor small butterflies and other external plug-ins, you only need to use the small screws provided in the camera accessories to fix the camera on the position of the license plate light. Through the adjustment of the iron plate or gasket in the fitting, the camera can achieve the best reversing angle. The wiring of the camera penetrates into the car through the gap in the license plate lamp and is connected to the power supply of the reversing lamp and the video extension cable. This type of installation of the reversing camera is currently one of the more popular ones, with a more discreet appearance and easier installation.
The other is drilled and embedded in the inside of the bumper, because the bumper is a plastic piece and the camera wiring is relatively easy.

Step 3

  Connect the power cord of the camera with the power cord of the rear rear-view lights. Then connect the video cable of the camera with the video extension cable, and the other end of the video extension cable is connected to the car display (car DVD & portable GPSNavigation & On-board Computer & On-Board Display).The AV input is connected. Finally, restore the battery power, start the car, hang the reversing gear, and you can see the reversing image on the on-board display.