Golden Starlight Night Vision Wide Angle Reverse Camera

AHD/CCD reversing camera

Product parameters

Image sensors

CCD (optional AHD)

Output signal format

NTSC (optional PAL)

Effective pixels

N system 728 (H) 500 (V) [optional P system AHD720P 1280 (H) 720 (V) / P system AHD1080P 1920 (H) 1080 (V)].

Horizontal viewing angle

120°/170°

Waterproof rating

IP68

Synchronization mode

Synchronization within the country

Electronic shutter

1/50 (1/60) - 1/100,000 sec

Minimum illumination

0.1 Lux / F1.2

Automatic gain control

Automatic

White balance

Automatic

Backlight compensation

Automatic

The type of output signal

CVBS (optional AHD)

Video output

RCA interface (optional head interface, price separately)

Horizontal clarity

500 TV Line [Optional 720 TV Line/1080 TV Line]

Signal-to-noise ratio

≥48dB 

How the image is displayed

Horizontal mirroring (optional orthogonal)

Identify the line

Three-color ruler (optional blue ruler)

Operating voltage

DC12V (optional 24V, can be customized 9V~36V wide voltage price separately)

Operating current

≥150mA 

power consumption

≥2W  

Operating temperature

 -20℃~+75℃（RH95% Max)

Storage temperature

 -30℃~+80℃（RH95% Max)

Product features

Using imported chips, the image color is high-definition and more realistic

Digital supplemental night vision function, automatic exposure compensation when light is low, can clearly see the road conditions behind the car

With an electronic scale, a scale is displayed on the display, so you can see the approximate distance of the rear object from the rear of the car

The video cable is connected to the display, the power cord is connected to the power supply of the reversing light, and the video line number is automatically switched when the reverse gear is hung, and it is specially designed according to the size of the license plate light or the trunk handle, which is well concealed and not easy to be exposed when perfectly combined with the body

The product is waterproof, moisture-proof, fog-proof, shockproof, voltage-proof and high-temperature resistant

The reversing camera can be connected to the on-board display equipment, including the on-board display, on-board DVD, rearview mirror display, portable GPS navigation, etc., which is convenient for all-round monitoring of the surrounding ring mirror when reversing, with a wider field of vision and easier reversing

Green products, energy saving, low power consumption

Packaging information

Packed in a neutral color box

Packing size: 14*9*4.5CM

Product accessories

 1 x Car Camera

1 x 6m power cord

1 x 1 meter power cord

1 sheet of the product manual

1 product box

Installation Steps

Step 1

First, remove the power supply cable at the car battery, and place the removed wire away from the electrodes to prevent the power supply from being accidentally turned on

Step 2

Determine the installation position of the vehicle camera, which is generally divided into two types:
One is installed in the position of the license plate lamp of the license plate frame, this installation is relatively easy, the special car only needs to replace it with the original car license plate lamp and clamp it steadily, and the small butterfly and other external plug-ins only need to use the small screws provided in the camera accessories to fix the camera on the position of the license plate lamp. Through the adjustment of the iron plate or gasket in the fitting, the camera can achieve the best reversing angle. The wiring of the camera penetrates into the car through the gap in the license plate lamp and is connected to the power supply of the reversing lamp and the video extension cable. This type of installation of the reversing camera is currently one of the more popular ones, with a more discreet appearance and easier installation.
The other is drilled and embedded in the inside of the bumper, because the bumper is a plastic piece and the camera wiring is relatively easy.

Step 3

Connect the power cord of the camera with the power cord of the rear rear-view lights. Then connect the video cable of the camera to the video extension cable, and the other end of the video extension cable is connected to the AV input of the car display (car DVD & portable GPS navigation & car computer & car display). Finally, restore the battery power, start the car, hang the reversing gear, and you can see the reversing image on the on-board display.